Plumbing price book template: 72 starting flat-rate prices
Pricebookr's Plumbing starter price book is a ready-to-load list of 72 flat-rate tasks and 53 materials. Task starting prices run from $89 (Service Call / Diagnostic) to $7,500 (Whole-House Repipe (PEX, avg home)), and each task states the scope it covers. Load it in a free trial, set your markup, and send it to Jobber.
What's in the Plumbing starter list
125 rows in total: 72 service tasks in 10 categories, each with a starting price and a unit, plus 53 materials with package sizes in their names.
The loaded list: every row keeps its category, unit, and starting price, ready for your markup schedule.
How the starting prices were set
Task prices were checked against published 2025–26 installed-cost guides from HomeGuide, accessed September 24, 2026: HomeGuide drain cleaning cost, HomeGuide plumbing estimates. Those guides report what homeowners pay for installed work, so these are starting points rather than market medians. Each task's cost field is an editorial estimate of parts and labor, which you should replace with your own.
Plumbing flat-rate tasks and starting prices
Drains & Sewer (9)
Task
Starting price
Scope
Camera Sewer Inspection
$248 each
Video inspection of main/sewer line.
Drain Cleaning — Sink / Tub / Shower
$248 each
Snake a secondary branch drain.
Drain Cleaning — Toilet Auger
$248 each
Auger a clogged toilet.
Drain Cleaning — Main Line (via cleanout)
$413 each
Clear main line through cleanout.
Kitchen Sink Drain Cleaning
$248 each
Snake kitchen branch line through an accessible cleanout or trap.
Sewer Cleanout Installation
$829 each
Add accessible cleanout to exposed sewer piping; excavation separate.
Pull Toilet for Drain Access (add-on)
$156 each
Add to a drain cleaning when there is no usable cleanout.
Hydro Jetting — Main Line
$895 each
High-pressure cleaning through an accessible cleanout; camera inspection separate.
Sewer Line Spot Repair
$2,200 each
Excavate and repair a damaged sewer section.
Fixtures & Appliances (7)
Task
Starting price
Scope
Garbage Disposal Replacement (1/2 HP)
$552 each
Replace 1/2 HP disposal.
Garbage Disposal Replacement (3/4 HP)
$695 each
Replace 3/4 HP disposal.
Dishwasher Hookup
$352 each
Connect supply, drain, and power.
Ice Maker Line Installation
$323 each
Run new refrigerator water line.
Bidet / Bidet Seat Installation
$248 each
Install bidet attachment/seat.
Garbage Disposal Jam Clear / Reset
$248 each
Clear a jammed disposal and reset it.
Washing Machine Hose Replacement
$373 each
Replace worn rubber washer hoses with braided stainless ones.
Faucets & Valves (7)
Task
Starting price
Scope
Kitchen Faucet Replacement
$297 each
Install customer-supplied kitchen faucet.
Bathroom Faucet Replacement
$297 each
Install customer-supplied lav faucet.
Faucet Cartridge / Repair
$354 each
Rebuild leaking faucet.
Angle Stop / Supply Valve Replacement
$310 each
Replace under-fixture shutoff.
Hose Bib / Outdoor Faucet Replacement
$369 each
Replace exterior spigot.
Shower Head Replacement
$335 each
Replace a shower head; swap in the customer's own if they supply it.
Tub Spout / Diverter Replacement
$348 each
Replace a leaking tub spout or a diverter that no longer sends water to the shower head.
Toilets (7)
Task
Starting price
Scope
Toilet Replacement (standard)
$729 each
Install new toilet, haul away old.
Toilet Rebuild (fill/flush/flapper)
$357 each
Rebuild internal tank components.
Toilet Fill Valve Replacement
$298 each
Replace tank fill valve and adjust water level.
Toilet Flapper Replacement
$278 each
Replace flapper and verify seal; standard tank.
Toilet Wax Ring / Reset
$280 each
Reset toilet with new wax ring.
Toilet Supply Line Replacement
$297 each
Replace a leaking or worn toilet supply line.
Toilet Flange Repair (add-on)
$176 each
Add to a toilet replacement or reset when the flange is broken.
Water Heaters (14)
Task
Starting price
Scope
Tank Water Heater Replacement (40-50 gal gas)
$1,683 each
Replace gas tank heater incl. permit.
Tank Water Heater Replacement (electric)
$1,559 each
Replace electric tank heater.
Tankless Water Heater Installation
$3,077 each
Install tankless unit, gas + venting.
Water Heater Flush / Maintenance
$248 each
Drain, flush, and inspect heater.
Electric Water Heater Element Replacement
$342 each
Replace one heating element on an accessible electric tank.
Water Heater Anode Rod Replacement
$371 each
Replace accessible tank anode rod; seized fittings extra.
Water Heater Gas Control Valve Replacement
$573 each
Replace gas control valve on compatible tank heater.
Thermocouple / Igniter Replacement
$319 each
Replace pilot thermocouple/igniter.
T&P Relief Valve Replacement
$349 each
Replace temperature/pressure valve.
Expansion Tank Installation
$368 each
Add thermal expansion tank.
Recirculation Pump Install
$748 each
Install hot-water recirculation pump.
Water Heater Thermostat Replacement (electric)
$335 each
Replace a failed upper or lower thermostat on an electric water heater.
Water Heater Drain Pan (add-on)
$173 each
Add to a water heater replacement where a pan is wanted or required.
Tankless Water Heater Flush / Descale
$323 each
Flush scale from a tankless water heater through its service valves.
Repairs & Leaks (17)
Task
Starting price
Scope
Pressure Regulator (PRV) Replacement
$575 each
Replace main pressure-reducing valve.
Main Water Shut-Off Valve Replacement
$415 each
Replace main house shutoff.
Pipe Leak Repair (accessible)
$323 each
Repair an accessible pipe leak.
Frozen Pipe Thaw
$248 each
Safely thaw frozen pipe.
Sink Drain / P-Trap Replacement
$290 each
Replace P-trap and tailpiece.
Bathtub Drain / Overflow Replacement
$370 each
Replace tub drain and overflow.
Shower Valve / Cartridge Replacement
$770 each
Replace shower mixing valve through existing access; wall repair excluded.
Shower Cartridge Replacement
$498 each
Replace compatible shower cartridge without opening wall.
Washing Machine Valve Box Replacement
$470 each
Replace recessed washer valve box.
Gas Line Repair / Extension
$435 each
Repair one accessible gas-line connection and leak-test; new run separate.
Gas Appliance Line Extension
$705 each
Short exposed branch extension to one appliance; permit and concealment extra.
Main Water Line Leak Repair (accessible)
$488 each
Repair one accessible service-line leak; excavation separate.
Backflow Preventer Repair / Rebuild
$458 each
Rebuild backflow assembly.
Bathroom Sink Pop-Up Drain Replacement
$348 each
Replace a leaking or broken bathroom sink pop-up drain.
Gas Appliance Connector Replacement
$344 each
Replace the flexible gas connector on a range, dryer or water heater.
Slab Leak Detection
$495 each
Locate under-slab leak.
Backflow Preventer Test
$145 each
Certified backflow test.
Pumps (4)
Task
Starting price
Scope
Sump Pump Replacement (1/3 HP)
$730 each
Replace primary sump pump.
Sump Pump Check Valve Replacement
$332 each
Replace accessible discharge check valve.
Sump Pump w/ Battery Backup
$1,013 each
Install pump + battery backup system.
Sewage Ejector Pump Replacement
$1,113 each
Replace basement ejector pump.
Water Treatment (3)
Task
Starting price
Scope
Water Softener Installation
$1,245 each
Install whole-home softener.
Whole-House Water Filtration Install
$1,113 each
Install whole-home filter.
Reverse Osmosis (under-sink) Install
$698 each
Install under-sink RO system.
Service & Diagnostics (3)
Task
Starting price
Scope
Service Call / Diagnostic
$89 per visit
Trip + diagnostic fee.
After-Hours / Emergency Service Call
$169 per visit
Nights, weekends, and holidays.
Water Pressure Test / Inspection
$119 each
Test system pressure and inspect fixtures.
Repiping (1)
Task
Starting price
Scope
Whole-House Repipe (PEX, avg home)
$7,500 each
Repipe supply lines in PEX.
Plumbing materials
The materials cover PEX, copper, PVC/DWV, and CPVC pipe and fittings, ball valves and angle stops, supply lines, toilet and faucet repair parts, water heater elements and anode rods, expansion tanks, and water heaters, pumps, and disposals. They load at cost with 0% markup; your markup schedule sets the selling price.
Materials — 24 items, e.g. Standard Toilet; Toilet Fill Valve
PVC & DWV — 1 item, e.g. PVC DWV Cleanout Adapter with Plug 3in
Valves — 4 items, e.g. Angle Stop 1/2in Comp x 3/8in Comp Quarter-Turn; Ball Valve 3/4in Sweat Full Port
Gas Fittings — 1 item, e.g. Gas Connector 1/2in x 48in Stainless
Supply Lines & Connectors — 5 items, e.g. Faucet Supply Line 3/8 Comp x 1/2 FIP 20in; Toilet Supply Line 12in
Toilet Parts — 3 items, e.g. Toilet Repair Kit Fill Valve and 2in/3in Flapper; Toilet Wax Ring with Bolts
Faucet & Shower Parts — 2 items, e.g. Shower Valve Cartridge (pressure-balance); Single-Handle Faucet Cartridge
Drain Parts — 1 item, e.g. P-Trap 1-1/2in Clear Plastic
Water Heater Parts — 6 items, e.g. Water Heater Element 4500W 240V LWD Stainless; Anode Rod Flexible Magnesium 42in
Equipment & Fixtures — 6 items, e.g. Water Heater 40 Gal Gas Tall 36k BTU; Water Heater 40 Gal Electric 4500W
How to use the template
Load the list. In a Pricebookr trial, choose Use this template from the empty catalog or from Settings. Items you already have (matched by name) are skipped, and a snapshot is taken first so the load can be rolled back.
Set your prices. Edit any starting price, or apply a markup schedule by cost band to reprice the whole list in one run.
Send it to Jobber. Push the finished price book to Jobber's products and services with the Jobber integration or export it for QuickBooks Online or Housecall Pro. Both need a paid plan.
Choose a starter list from the empty catalog or from Settings.
FAQ
Is the plumbing price book template free?
The Plumbing list loads during Pricebookr's 14-day free trial, with no credit card required. Pushing prices to Jobber and exporting the catalog need a paid plan.
Are these national average plumbing prices?
No. They are starting prices for a plumbing shop in the U.S., checked against published 2025–26 installed-cost guides from HomeGuide, accessed September 24, 2026. They are not surveyed contractor medians. Review them for your labor rate, overhead, and market before quoting.
Where do the material costs come from?
53 of the 53 material rows load with a captured retail cost and no markup, so cost and price start equal. Replace them with your supply house costs and let your markup schedule set the selling price.
What happens to items I already have?
Anything whose name matches an item already in your catalog is skipped, so loading the list twice or into an existing catalog never creates duplicates.
Start from the Plumbing list instead of a blank spreadsheet.
Load 125 priced rows, set your markup, and send them to Jobber. Free for 14 days.
Start your free trial