What's in the HVAC starter list
246 rows in total: 130 service tasks in 9 categories, each with a starting price and a unit, plus 116 materials with package sizes in their names.

How the starting prices were set
Task prices were checked against published 2025–26 installed-cost guides from HomeGuide, PickHVAC, and Fixr, accessed September 24 and October 5, 2026: HomeGuide AC repair cost, HomeGuide AC installation cost, HomeGuide furnace repair cost, Fixr heat pump repair cost. Those guides report what homeowners pay for installed work, so these are starting points rather than market medians. Each task's cost field is an editorial estimate of parts and labor, which you should replace with your own.
HVAC flat-rate tasks and starting prices
Installations
| Task | Starting price | Scope |
|---|---|---|
| Central AC Condenser Replacement (3-ton, 14.3 SEER2) | $5,225 each | Replace outdoor condensing unit. |
| AC System Replacement — Condenser + Coil (2-ton) | $6,320 per system | Matched A2L (R-454B or R-32) condenser and cased coil, entry efficiency; reuses a sound line set, pad, and disconnect. Ductwork, electrical upgrades, and permit vary. |
| AC System Replacement — Condenser + Coil (3-ton) | $7,120 per system | Matched A2L (R-454B or R-32) condenser and cased coil, entry efficiency; reuses a sound line set, pad, and disconnect. Ductwork, electrical upgrades, and permit vary. |
| AC System Replacement — Condenser + Coil (4-ton) | $8,285 per system | Matched A2L (R-454B or R-32) condenser and cased coil, entry efficiency; reuses a sound line set, pad, and disconnect. Ductwork, electrical upgrades, and permit vary. |
| AC System Replacement — Condenser + Coil (5-ton) | $9,085 per system | Matched A2L (R-454B or R-32) condenser and cased coil, entry efficiency; reuses a sound line set, pad, and disconnect. Ductwork, electrical upgrades, and permit vary. |
| Heat Pump System Replacement (2-ton) | $8,220 per system | Matched A2L heat pump and air handler with heat strips, entry efficiency; reuses a sound line set and pad. Ductwork, electrical upgrades, and permit vary. |
| Heat Pump System Replacement (3-ton) | $9,520 per system | Matched A2L heat pump and air handler with heat strips, entry efficiency; reuses a sound line set and pad. Ductwork, electrical upgrades, and permit vary. |
| Heat Pump System Replacement (4-ton) | $10,985 per system | Matched A2L heat pump and air handler with heat strips, entry efficiency; reuses a sound line set and pad. Ductwork, electrical upgrades, and permit vary. |
| Heat Pump System Replacement (5-ton) | $12,185 per system | Matched A2L heat pump and air handler with heat strips, entry efficiency; reuses a sound line set and pad. Ductwork, electrical upgrades, and permit vary. |
| Complete System Replacement (AC + Furnace, 3-ton) | $10,580 per system | Matched condenser + furnace + coil install. |
| Gas Furnace Replacement (80% AFUE) | $3,625 each | Replace gas furnace, standard efficiency. |
| Gas Furnace Replacement (96% AFUE) | $6,020 each | Replace with a 96% AFUE condensing furnace, including PVC venting and condensate drain at the existing location. |
| Air Handler / Evaporator Replacement | $3,990 each | Replace indoor air handler or evaporator. |
| Mini-Split Install — Single Zone (12k BTU) | $3,490 each | Ductless heat pump, one indoor head. |
| Mini-Split Install — Single Zone (18k BTU) | $4,173 each | Ductless heat pump, one indoor head. |
| Mini-Split Install — Single Zone (24k BTU) | $4,755 each | Ductless heat pump, one indoor head. |
| Mini-Split Install — Dual Zone | $7,750 each | Multi-zone ductless heat pump with two indoor heads. |
| Mini-Split Install — Tri-Zone | $10,735 each | Multi-zone ductless heat pump with three indoor heads. |
| Packaged Gas/Electric Unit Replacement (3-ton) | $7,450 each | Replace a ground- or curb-mounted gas/electric package unit on the existing pad or curb; crane, curb adapter, and permit extra. |
| Packaged Gas/Electric Unit Replacement (4-ton) | $8,950 each | Replace a ground- or curb-mounted gas/electric package unit on the existing pad or curb; crane, curb adapter, and permit extra. |
| Packaged Heat Pump Replacement (3-ton) | $6,950 each | Replace a ground- or curb-mounted packaged heat pump on the existing pad or curb; crane, curb adapter, and permit extra. |
Heating Repairs
| Task | Starting price | Scope |
|---|---|---|
| Blower Motor Replacement (PSC) | $690 each | Replace standard PSC blower motor. |
| ECM Blower Motor Replacement (constant-torque) | $1,030 each | Replace a failed constant-torque (X13-style) ECM blower motor like for like. The existing wheel is reused. |
| ECM Blower Motor Replacement | $1,313 each | Replace variable-speed ECM blower motor. |
| ECM Blower Control Module Replacement | $848 each | Replace failed module when the motor itself is serviceable. |
| Blower Wheel Replacement | $575 each | Replace and balance blower wheel. |
| Blower Motor Capacitor Replacement | $307 each | Replace PSC blower motor run capacitor. |
| Hot-Surface Ignitor Replacement | $405 each | Replace furnace hot-surface ignitor. |
| Flame Sensor Cleaning | $248 each | Remove and clean the flame sensor, then check the flame signal. |
| Flame Sensor Replacement | $360 each | Replace the flame sensor and check the flame signal. |
| Spark Ignitor / Ignition Module Replacement | $563 each | Replace a failed spark or intermittent-pilot ignition control. |
| Gas Valve Replacement | $523 each | Replace furnace gas valve. |
| Inducer Motor Replacement | $698 each | Replace draft inducer motor assembly. |
| Pressure Switch Replacement | $353 each | Replace furnace pressure switch. |
| Limit Switch Replacement | $348 each | Replace high-limit safety switch. |
| Flame Rollout Switch Replacement | $308 each | Replace a tripped or failed rollout switch after checking venting and heat exchanger for the cause. |
| Furnace Door Switch Replacement | $308 each | Replace the furnace's blower-door safety switch. |
| Furnace Heat Exchanger Replacement | $1,890 each | Replace accessible heat exchanger; manufacturer warranty and vent work vary. |
| Burner Cleaning | $248 each | Remove, clean, and refit the furnace burners, then check the flame. |
| Condensate Trap Clean / Replace (condensing furnace) | $335 each | Clear or replace the condensate trap and hoses on a 90%+ condensing furnace. |
| Pilot Thermocouple Replacement | $319 each | Replace standing-pilot thermocouple on a furnace or wall heater. |
| Flue / Vent Pipe Repair | $388 each | Repair an accessible section of furnace vent pipe; full vent replacement separate. |
| Gas Flex Connector & Shutoff Replacement | $404 each | Replace the flexible gas connector and shutoff valve at the furnace, then leak check. |
| Heat Strip / Element Replacement | $528 each | Replace electric heat strip element. |
| Electric Heat Sequencer Replacement | $370 each | Replace a failed heat-strip sequencer or heat relay in an air handler or electric furnace. |
| Heat Pump Defrost Sensor Replacement | $335 each | Replace a heat pump's coil or ambient defrost sensor and check a defrost cycle. |
| Low-Voltage Fuse Replacement | $38 each | Replace the control board's low-voltage fuse. Priced as an add-on; finding the short is its own task. |
Service & Diagnostics
| Task | Starting price | Scope |
|---|---|---|
| Difficult Access Adder (attic / crawlspace / roof) | $165 each | Added to a repair when the equipment is in an attic, a crawlspace, or on a roof. Book hours on other tasks assume ground level or a closet. |
| Diagnostic / Service Call | $89 per visit | Standard trip + diagnostic fee (often waived with repair). |
| After-Hours / Emergency Diagnostic | $159 per visit | Nights, weekends, and holidays. |
| Second-Opinion Inspection | $79 per visit | Review of another company's recommendation. |
Maintenance
| Task | Starting price | Scope |
|---|---|---|
| Heat Pump Tune-Up | $139 per system | Seasonal heat pump maintenance: check heating, cooling, and defrost. |
| Mini-Split Deep Clean (per head) | $308 each | Deep-clean one ductless indoor head: coil, blower wheel, and drain pan. |
| Condenser Coil Cleaning | $308 each | Deep clean of outdoor condenser coil. |
| Evaporator Coil Cleaning (in place) | $308 each | Clean indoor coil without removal. |
| Evaporator Coil Pull-and-Clean | $958 each | Pull a badly fouled evaporator coil to clean it, then reinstall with a new filter drier, evacuate, and recharge. |
| Blower Wheel Pull-and-Clean | $248 each | Pull the blower assembly and clean the wheel and housing. |
| Condensate Drain Clearing | $248 each | Clear clogged condensate line, treat with tablets. |
| Condensate Cleanout Tee Install | $288 each | Add a cleanout tee and cap to the condensate drain so it can be flushed. |
| AC Tune-Up / Precision Cleaning | $129 per system | Seasonal cooling maintenance, 20+ point check. |
| Furnace Tune-Up / Safety Inspection | $119 per system | Seasonal heating maintenance and combustion check. |
| Annual Maintenance Plan (2 visits) | $229 per year | Spring AC + fall furnace tune-ups, priority service. |
Electrical & Controls
| Task | Starting price | Scope |
|---|---|---|
| Condenser Disconnect Replacement | $441 each | Replace outdoor AC disconnect at existing location. |
| Condenser Disconnect Replacement (fused) | $447 each | Replace a fused outdoor AC disconnect at the existing location. |
| AC Whip Replacement | $370 each | Replace the electrical whip between the disconnect and the outdoor unit. |
| Control Board Replacement | $623 each | Replace furnace/air-handler control board. |
| Transformer Replacement | $336 each | Replace 24V control transformer. |
| Fan Relay Replacement | $312 each | Replace blower fan relay. |
| Heat Pump Defrost Board Replacement | $563 each | Replace outdoor defrost control board and verify operation. |
| Thermostat Wire Repair | $308 each | Repair accessible low-voltage thermostat wiring; concealed rewiring excluded. |
| Thermostat Wire New Run | $593 each | Run new thermostat cable from the equipment to the thermostat. |
| Thermostat — Non-Programmable Install | $370 each | Install a basic non-programmable thermostat on existing wiring. |
| Thermostat — Programmable Install | $405 each | Install programmable thermostat. |
| Thermostat — Smart / Wi-Fi Install | $522 each | Install and configure smart thermostat. |
| HVAC Surge Protector Install | $505 each | Protect condenser/air handler from surges. |
| Float Switch Wiring / Reset | $248 each | Check, rewire, or reset a condensate float switch. |
| Low-Voltage Short Trace | $248 each | Trace a low-voltage short that keeps blowing the control fuse. The repair is quoted separately. |
Indoor Air Quality
| Task | Starting price | Scope |
|---|---|---|
| UV Air Purifier Installation | $548 each | Install UV germicidal light in air handler. |
| UV Bulb Replacement | $260 each | Replace the bulb in an existing UV air purifier. Priced as an add-on to another visit. |
| Media Air Filter Cabinet Install | $605 each | Install 4" media filter cabinet. |
| Whole-Home Humidifier Install | $813 each | Install bypass/powered humidifier. |
| Humidifier Pad Replacement | $143 each | Replace a humidifier's water panel. Priced as an add-on to another visit. |
| Filter Change (labor) | $33 each | Labor to change an air filter during a visit. The filter is charged separately. |
| Return Filter Grille Replacement | $464 each | Replace a return air filter grille of the same size. |
Ductwork
| Task | Starting price | Scope |
|---|---|---|
| Supply / Return Register Replacement | $129 each | Replace a supply or return register. |
| Return Air Grille Replacement | $434 each | Replace a return air grille of the same size. |
| Duct Sealing (per system) | $635 per system | Seal accessible duct joints and boots. |
| Flexible Duct Run Replacement | $517 each | Replace one flexible duct run. |
| Plenum Replacement | $1,035 each | Replace a damaged supply or return plenum and reconnect the ducts. |
| Manual Balancing Damper Install | $348 each | Fit a manual balancing damper in one duct run. |
| Zone Damper Motor Replacement | $493 each | Replace a failed zone damper actuator. |
| Duct Insulation Wrap (per run) | $353 each | Wrap one accessible duct run with insulation. |
Cooling Repairs
| Task | Starting price | Scope |
|---|---|---|
| Run Capacitor Replacement | $302 each | Replace a failed single run capacitor at a ground-level condenser. Diagnostic charged separately. |
| Dual-Run Capacitor Replacement | $342 each | Replace a failed compressor and fan dual run capacitor at a ground-level condenser. Diagnostic charged separately. |
| Contactor Replacement | $321 each | Replace a pitted or stuck condenser contactor and re-terminate the existing wires. |
| Hard-Start Kit Installation | $317 each | Add a hard-start kit to help a compressor that struggles to start, and check its amp draw afterwards. |
| Condenser Fan Motor Replacement | $637 each | Replace a failed PSC condenser fan motor with a new run capacitor. The existing blade is reused. |
| Condenser Fan Motor Replacement (ECM) | $809 each | Replace a failed ECM condenser fan motor with an OEM-style motor. The existing blade is reused. |
| Condenser Fan Blade Replacement | $440 each | Replace a bent or cracked condenser fan blade. The existing motor is reused. |
| Compressor Replacement (R-410A, 2-ton) | $2,353 each | Replace a failed 2-ton R-410A compressor at ground level: recover, braze in the new compressor and filter drier, pressure test, evacuate, and recharge with 6 lb. |
| Compressor Replacement (R-410A, 3-ton) | $2,728 each | Replace a failed 3-ton R-410A compressor at ground level: recover, braze in the new compressor and filter drier, pressure test, evacuate, and recharge with 8 lb. |
| Compressor Replacement (R-410A, 4-ton) | $3,103 each | Replace a failed 4-ton R-410A compressor at ground level: recover, braze in the new compressor and filter drier, pressure test, evacuate, and recharge with 10 lb. |
| Compressor Replacement (R-410A, 5-ton) | $3,553 each | Replace a failed 5-ton R-410A compressor at ground level: recover, braze in the new compressor and filter drier, pressure test, evacuate, and recharge with 12 lb. |
| Evaporator Coil Replacement (cased, 2-ton) | $2,428 each | Replace a leaking 2-ton cased evaporator coil on a closet or ground-level furnace: recover, braze in the new coil and filter drier, pressure test, evacuate, and recharge with 6 lb. |
| Evaporator Coil Replacement (cased, 3-ton) | $2,578 each | Replace a leaking 3-ton cased evaporator coil on a closet or ground-level furnace: recover, braze in the new coil and filter drier, pressure test, evacuate, and recharge with 8 lb. |
| Evaporator Coil Replacement (cased, 4-ton) | $2,953 each | Replace a leaking 4-ton cased evaporator coil on a closet or ground-level furnace: recover, braze in the new coil and filter drier, pressure test, evacuate, and recharge with 10 lb. |
| Evaporator Coil Replacement (cased, 5-ton) | $3,328 each | Replace a leaking 5-ton cased evaporator coil on a closet or ground-level furnace: recover, braze in the new coil and filter drier, pressure test, evacuate, and recharge with 12 lb. |
| TXV / Metering Device Replacement | $763 each | Replace a threaded or flare-connected TXV that can be reached from outside the coil cabinet: pump down, swap the valve, and top off 1 lb. |
| TXV Replacement (braze-in) | $1,090 each | Replace a brazed-in TXV on a coil that can be reached without cutting the plenum: recover, braze, new filter drier, evacuate, and recharge. |
| Piston / Orifice Replacement | $383 each | Replace a wrong-size or blocked piston: pump down, swap the piston, and top off 1 lb. |
| Liquid-Line Filter Drier Replacement | $493 each | Replace an accessible liquid-line filter drier: pump down or recover, braze in the new drier, evacuate, and top off 1 lb. |
| Reversing Valve Replacement | $1,563 each | Replace an accessible heat pump reversing valve: recover, braze with a heat sink, new filter drier, evacuate, and return the charge with 2 lb of new refrigerant. |
| Reversing Valve Solenoid Coil Replacement | $370 each | Replace the reversing valve's solenoid coil. The valve body is not opened. |
| Crankcase Heater Replacement | $405 each | Replace a failed band-style compressor crankcase heater. |
| High / Low Pressure Switch Replacement | $370 each | Replace a screw-on refrigerant pressure switch mounted on a Schrader port. |
| Service Valve Core Replacement | $113 each | Replace both service valve cores with a core-removal tool, without recovering the charge. Priced as an add-on to another repair. |
| Locking Refrigerant Caps | $93 each | Fit locking caps on both service ports. Priced as an add-on to another repair. |
| Condensate Pump Replacement | $449 each | Replace a failed condensate pump, reusing the existing discharge tubing. |
| Condensate Safety Switch Installation | $379 each | Add a float switch that shuts cooling off if the condensate drain backs up. |
| Secondary Condensate Pan Replacement | $736 each | Replace an accessible auxiliary drain pan under the unit and fit a pan float switch. |
| Primary Drain Pan Replacement (horizontal coil) | $810 each | Replace the primary drain pan on a horizontal coil by sliding the coil out far enough to swap it. No refrigerant work. |
Refrigerant
| Task | Starting price | Scope |
|---|---|---|
| Refrigerant Leak Search | $248 each | Find a refrigerant leak with an electronic detector and a soap test. The repair is quoted separately. |
| Leak Repair (accessible braze joint) | $455 each | Braze one reachable leaking joint. Evacuation and refrigerant are on their own lines. |
| Nitrogen Standing Pressure Test | $298 each | Pressurize the sealed system with dry nitrogen and hold to confirm or locate a leak. Repair and refrigerant are separate. |
| System Evacuation & Weigh-In Charge | $248 each | Evacuate to 500 microns with a decay test, then weigh in the charge after sealed-system work. Refrigerant is charged per pound. |
| Refrigerant Recovery | $124 each | Recover the system's charge into a cylinder before sealed-system work. Priced as an add-on to another repair. |
| Refrigerant Recharge — R-410A | $75 per lb | Per pound of R-410A added. Leak diagnosis is separate. |
| Refrigerant Recharge — R-454B | $80 per lb | Per pound of R-454B added on compatible equipment. Leak diagnosis is separate. |
| Refrigerant Recharge — R-22 | $125 per lb | Per pound of R-22 added on a legacy system. Leak diagnosis is separate. |
| Refrigerant Recharge — R-32 | $65 per lb | Per pound of R-32 added on compatible equipment. Leak diagnosis is separate. |
HVAC materials
The materials cover capacitors by MFD rating, contactors and relays, condenser fan and blower motors, ignitors and flame sensors, condensate pumps and switches, disconnects, thermostats, filters by size and MERV, registers, flex duct, pads, and line sets. 90 of them load at cost with 0% markup; your markup schedule sets the selling price. The other 26 are generic rows with a starting price.
- Refrigerant — 1 item, e.g. R-410A Refrigerant (shop stock)
- Compressors & Coils — 8 items, e.g. Scroll Compressor 2-Ton R-410A; Scroll Compressor 3-Ton R-410A
- Refrigeration Parts — 11 items, e.g. Thermostatic Expansion Valve (TXV) R-410A; Piston / Orifice
- Motors — 9 items, e.g. ECM Condenser Fan Motor; Condenser Fan Blade
- Condensate — 8 items, e.g. Secondary Drain Pan; Primary Drain Pan (horizontal coil)
- Ignition & Gas Controls — 10 items, e.g. Furnace Ignition Module; Furnace Gas Valve
- Pads & Venting — 1 item, e.g. Vent Pipe and Fittings Allowance
- Line Sets & Gas — 2 items, e.g. Gas Shutoff Valve; Gas Connector 1/2in x 48in Stainless
- Electrical Components — 9 items, e.g. Heat Strip Element; Heat Sequencer
- Thermostats & Wire — 4 items, e.g. Thermostat Wire Allowance; Programmable Thermostat
- IAQ & Cleaning — 5 items, e.g. UV Air Purifier Light; UV Replacement Bulb
- Duct & Sealing — 6 items, e.g. Duct Mastic and Tape Allowance; Sheet-Metal Plenum Allowance
- Equipment — 31 items, e.g. AC Condenser 2-Ton (entry efficiency); AC Condenser 3-Ton (entry efficiency)
- Capacitors — 3 items, e.g. Dual Run Capacitor 45/5 MFD 440V; Run Capacitor 5 MFD 440V Oval
- Contactors & Relays — 2 items, e.g. Contactor 2-Pole 30A 24V Coil; Fan Relay SPDT 24V Coil
- Disconnects & Whips — 3 items, e.g. AC Disconnect 60A Non-Fused; AC Disconnect 60A Fused
- Registers & Grilles — 3 items, e.g. Register 10x6 3-Way Wall/Ceiling; Return Filter Grille 20x25
How to use the template
- Load the list. In a Pricebookr trial, choose Use this template from the empty catalog or from Settings. Items you already have (matched by name) are skipped, and a snapshot is taken first so the load can be rolled back.
- Set your prices. Edit any starting price, or apply a markup schedule by cost band to reprice the whole list in one run.
- Send it to Jobber. Push the finished price book to Jobber's products and services with the Jobber integration or export it for QuickBooks Online or Housecall Pro. Both need a paid plan.

FAQ
Is the HVAC price book template free?
The HVAC list loads during Pricebookr's 14-day free trial, with no credit card required. Pushing prices to Jobber and exporting the catalog need a paid plan.
Are these national average HVAC prices?
No. They are starting prices for an HVAC shop in the U.S., checked against published 2025–26 installed-cost guides from HomeGuide, PickHVAC, and Fixr, accessed September 24 and October 5, 2026. They are not surveyed contractor medians. Review them for your labor rate, overhead, and market before quoting.
Where do the material costs come from?
90 of the 116 material rows load with a captured retail cost and no markup, so cost and price start equal. Replace them with your supply house costs and let your markup schedule set the selling price.
What happens to items I already have?
Anything whose name matches an item already in your catalog is skipped, so loading the list twice or into an existing catalog never creates duplicates.