Electrical price book template: 66 starting flat-rate prices
Pricebookr's Electrical starter price book is a ready-to-load list of 66 flat-rate tasks and 50 materials. Task starting prices run from $99 (Service Call / Diagnostic) to $14,000 (Whole-Home Rewire (avg home)), and each task states the scope it covers. Load it in a free trial, set your markup, and send it to Jobber.
What's in the Electrical starter list
116 rows in total: 66 service tasks in 8 categories, each with a starting price and a unit, plus 50 materials with package sizes in their names.
The loaded list: every row keeps its category, unit, and starting price, ready for your markup schedule.
How the starting prices were set
Task prices were checked against published 2025–26 installed-cost guides from HomeGuide, accessed September 24, 2026: HomeGuide electrical work pricing, HomeGuide 240V outlet cost. Those guides report what homeowners pay for installed work, so these are starting points rather than market medians. Each task's cost field is an editorial estimate of parts and labor, which you should replace with your own.
Electrical flat-rate tasks and starting prices
Service & Diagnostics (4)
Task
Starting price
Scope
Electrical Safety Inspection
$248 each
Whole-home safety inspection + report.
Troubleshoot Dead Circuit / Outlet
$248 each
Diagnose a dead circuit or device.
Service Call / Diagnostic
$99 per visit
Trip + diagnostic fee.
After-Hours / Emergency Service Call
$189 per visit
Nights, weekends, and holidays.
Outlets & Switches (15)
Task
Starting price
Scope
Standard Outlet Replacement
$254 each
Replace a standard receptacle.
New Outlet Installation (existing circuit)
$329 each
Add an outlet on a nearby circuit.
GFCI Outlet Installation
$280 each
Install GFCI-protected receptacle.
USB / Smart Outlet Installation
$335 each
Install USB or smart receptacle.
240V Outlet Installation (dryer/range)
$703 each
Install 240V appliance receptacle on an existing suitable circuit; new circuit separate.
GFCI Outlet Replacement
$280 each
Replace failed GFCI receptacle at existing box.
Weatherproof Cover Replacement
$308 each
Replace exterior receptacle cover and gasket.
Outdoor / Weatherproof Outlet Installation
$525 each
Install exterior in-use covered outlet.
Light Switch Replacement
$263 each
Replace a standard switch.
Dimmer Switch Installation
$358 each
Install dimmer switch.
Smart Switch Installation
$388 each
Install and connect smart switch.
Three-Way Switch Installation
$308 each
Install/repair 3-way switching.
Dryer / Range Cord Replacement
$335 each
Replace a damaged dryer or range cord, or change a 3-wire cord to 4-wire to match the receptacle.
Occupancy / Motion Sensor Switch
$371 each
Replace a wall switch with one that turns the lights on and off by motion.
Line-Voltage Thermostat Replacement
$353 each
Replace the thermostat on an electric baseboard or wall heater.
Lighting (11)
Task
Starting price
Scope
Light Fixture Replacement
$248 each
Replace a standard light fixture.
Chandelier Installation
$413 each
Hang and wire a chandelier.
Recessed Light Installation (per can)
$255 each
Install one recessed can light.
LED Recessed Trim Retrofit
$126 each
Replace trim in existing compatible recessed housing.
Under-Cabinet Lighting (per run)
$405 each
Install under-cabinet light run.
Motion / Flood Light Installation
$388 each
Install motion-activated flood light.
Exterior / Security Light Installation
$405 each
Install exterior security fixture.
Landscape Lighting (per fixture)
$188 each
Install low-voltage landscape light.
Doorbell / Video Doorbell Installation
$248 each
Install wired or video doorbell.
Photocell / Timer Installation
$317 each
Put existing outdoor lights on a dusk-to-dawn photocell.
Doorbell Transformer Replacement
$348 each
Replace a failed doorbell transformer, or upsize it for a video doorbell.
Fans (6)
Task
Starting price
Scope
Ceiling Fan Installation (existing wiring)
$248 each
Replace/install fan on existing box.
Ceiling Fan Installation (new wiring + brace)
$670 each
Install fan with new box and brace.
Bathroom Exhaust Fan Replacement
$458 each
Replace existing bath exhaust fan.
Bathroom Exhaust Fan Motor Replacement
$353 each
Replace compatible motor assembly in existing fan housing.
Bathroom Exhaust Fan (new vent run)
$875 each
Install fan with new duct to exterior.
Attic / Whole-House Fan Installation
$1,160 each
Install attic ventilation fan.
Panels & Breakers (9)
Task
Starting price
Scope
Circuit Breaker Replacement
$288 each
Replace a standard breaker.
GFCI / AFCI Breaker Installation
$423 each
Install GFCI/AFCI breaker.
AFCI Breaker Replacement
$423 each
Replace one compatible arc-fault breaker and test circuit.
Panel Circuit Labeling
$248 each
Trace and label branch circuits in one accessible panel.
Sub-Panel Installation
$1,330 each
Install a sub-panel.
Panel Upgrade 100A → 200A
$2,695 each
Upgrade main service to 200A.
Panel Replacement (200A)
$2,115 each
Replace existing 200A panel.
Meter Base Replacement
$1,100 each
Replace service meter base.
Panel Maintenance (inspect and torque)
$248 each
Annual panel check: inspect for heat, corrosion and loose terminals, and torque connections.
Wiring & Circuits (11)
Task
Starting price
Scope
New Circuit Installation (15/20A)
$599 each
Run a new general-purpose circuit.
Dedicated Appliance Circuit
$599 each
Run dedicated circuit for an appliance.
Dedicated 240V Circuit (short run)
$785 each
Run new 240V branch circuit near panel; appliance outlet included.
Dedicated 20A Kitchen Circuit
$707 each
Run one new 20A small-appliance branch circuit with outlet.
Hot Tub / Spa Circuit Installation
$1,495 each
Install GFCI-protected spa circuit.
TV / Equipment Mounting Circuit
$348 each
Add recessed outlet behind TV.
Aluminum Wiring Remediation (per device)
$106 each
Pigtail/COPALUM per connection.
Knob-and-Tube Replacement (per circuit)
$1,310 each
Replace one K&T circuit.
Appliance Hardwire Connection
$323 each
Hardwire a dishwasher, disposal, water heater or similar appliance to its existing circuit.
Open Splice / Junction Box Repair
$282 each
Put an exposed or buried splice into an accessible junction box.
Whole-Home Rewire (avg home)
$14,000 each
Full rewire of an average home.
Safety & Generators (8)
Task
Starting price
Scope
Whole-House Surge Protector
$638 each
Install panel-mounted surge protector.
Smoke / CO Detector Replacement (hardwired)
$172 each
Replace one hardwired detector on existing interconnect.
Smoke / CO Detector Installation (hardwired)
$363 each
Install interconnected hardwired detector.
Ground Rod Installation
$335 each
Install one grounding electrode and accessible conductor connection.
Generator Interlock Kit Installation
$615 each
Install panel interlock for portable generator.
Manual Transfer Switch Installation
$1,425 each
Install manual transfer switch.
Generator Inlet Box Installation
$763 each
Install exterior generator inlet.
Standby Generator Installation (whole-home)
$6,500 each
Install automatic standby generator.
EV Charging (2)
Task
Starting price
Scope
EV Charger Installation (Level 2, near panel)
$958 each
Install customer-supplied Level 2 charger near panel; existing capacity assumed.
EV Charger Circuit (long run)
$1,540 each
Level 2 charger with long conduit run.
Electrical materials
The materials cover wire by gauge and length, breakers, panels and service gear, raceway and conduit fittings, boxes, devices, cover plates, connectors, lighting, and controls. 48 of them load at cost with 0% markup; your markup schedule sets the selling price. The other 2 are generic rows with a starting price.
Materials — 47 items, e.g. Standard 15A Receptacle; GFCI Receptacle
Boxes — 1 item, e.g. Junction Box 1-Gang Old Work
Detection and Controls — 2 items, e.g. Motion Sensor Switch In Wall Fans and Lights; Photocell 1800W 120V Button Mount Gray
How to use the template
Load the list. In a Pricebookr trial, choose Use this template from the empty catalog or from Settings. Items you already have (matched by name) are skipped, and a snapshot is taken first so the load can be rolled back.
Set your prices. Edit any starting price, or apply a markup schedule by cost band to reprice the whole list in one run.
Send it to Jobber. Push the finished price book to Jobber's products and services with the Jobber integration or export it for QuickBooks Online or Housecall Pro. Both need a paid plan.
Choose a starter list from the empty catalog or from Settings.
FAQ
Is the electrical price book template free?
The Electrical list loads during Pricebookr's 14-day free trial, with no credit card required. Pushing prices to Jobber and exporting the catalog need a paid plan.
Are these national average electrical prices?
No. They are starting prices for an electrical contractor in the U.S., checked against published 2025–26 installed-cost guides from HomeGuide, accessed September 24, 2026. They are not surveyed contractor medians. Review them for your labor rate, overhead, and market before quoting.
Where do the material costs come from?
48 of the 50 material rows load with a captured retail cost and no markup, so cost and price start equal. Replace them with your supply house costs and let your markup schedule set the selling price.
What happens to items I already have?
Anything whose name matches an item already in your catalog is skipped, so loading the list twice or into an existing catalog never creates duplicates.
Start from the Electrical list instead of a blank spreadsheet.
Load 116 priced rows, set your markup, and send them to Jobber. Free for 14 days.
Start your free trial