---
title: "Scan data plates to fill in equipment"
description: "Photograph a unit's data plate in the field, let Prycey read the brand, model, serial and ratings, then check the reading against the photo before it becomes equipment."
category: "In the field"
source: "https://www.pricebookr.com/docs/dataplate-scans"
---

# Scan data plates to fill in equipment

**Take the photo with Data plate photo on the phone, have Prycey read it, then check the model, serial and ratings against the photo and tap Create equipment or link it to a unit you already have.** Nothing becomes equipment until a person confirms it. The tech can do that on the phone, or the office can do it later on a big screen under **CRM → Data plates**.

## 1. Take the data plate photo

On the phone, open the job and go to either:

- **Photos & video → Data plate photo**, for a unit you haven't added yet, or
- **Equipment & readings** → the unit → **Photo of data plate**, for a unit already on the property.

Data plate photos upload at full resolution so the small print stays readable, and they're marked for review so the office sees them even if nobody scans them in the field.

## 2. Read it with Prycey

Scanning happens from the job's photos, not from the Prycey chat; on the phone, Prycey points you there: **To read a dataplate, open the job → Photos & video → Scan dataplates.**

On the phone: **Photos & video → Scan dataplates**, tap **Select dataplate** on each photo, then **Review N selected dataplates**. On the web: select the photos in a customer's or job's photos and click **Scan dataplate** or **Scan selected dataplates** (up to 10 at a time).

Before anything is read, you see how many Prycey credits it can use and your company's balance. If the label is sideways, use **↻ Turn photo** so it reads upright, then **Scan selected photos**.

- A completed read uses credits even when no readable label is found.
- Photos read before are reused at no charge. Reviewing and saving use no extra credits.
- Credits are bought by an admin; see [Prycey AI assistant](https://www.pricebookr.com/docs/prycey-ai-assistant).

## 3. Check the reading and save it

Each plate found in the photo gets its own form: **Unit type**, **Brand**, **Model**, **Serial**, **Refrigerant** and the printed ratings. Correct anything that's wrong, then tick **I checked the model, serial and printed ratings against the photo**. If Prycey wasn't sure, it says **Some characters were unclear. Check the original label before saving.**

| Choose | What happens |
| --- | --- |
| Create equipment | A new unit is added at the photo's property with the reviewed values. |
| Link to selected equipment (web) / Link photo (phone) | The photo is tied to a unit already on the property. Blank fields on the unit are filled in; values it already has are kept, unless you tick the ones this scan should correct. |
| Keep photo only | The photo stays in the gallery; no equipment is created or changed. |

When a unit at the property already has the same model and serial, the form says **Matching model and serial found. Review before linking.**

**You'll know it worked when** the form is replaced by **Photo linked and reviewed specifications saved to equipment.** or the unit appears under **Equipment & readings**.

## The office's Data plates list

**CRM → Data plates** (Admin and Sales) shows data plate photos from the last 30 days in two groups:

- **Needs review** — read by Prycey and waiting for someone to confirm the unit.
- **Not scanned yet** — taken as a data plate but never read.

Each card shows the photo, customer, job, address and when it was taken, with the same scan and review controls. This is where a tech can leave the typing to the office instead of keying in a serial in a crawlspace.

## Scan automatically (optional)

An admin can turn on **Scan data plate photos automatically** under **CRM → CRM Admin → Jobs & field → Job closeout**. It's off by default. When it's on, the first time a tech takes a data plate photo on a job the phone asks **Scan data plates on this job automatically?** with **Scan automatically** or **Not on this job**. After a yes, each data plate photo on that job is read as soon as it uploads, within your shop's monthly limit. Results still wait for a person to confirm them.

## Typing it in instead

You can always skip the scan. On the phone, **Equipment & readings** → the unit → **Edit data plate** (or **Add unit**) and type the details. On the web, edit the equipment on the customer record; see [Add customers, properties and equipment](https://www.pricebookr.com/docs/customers-properties-and-equipment).

Changing a unit's brand, model, serial or install date puts it back to **Needs review** for warranty registration; see [Register equipment warranties](https://www.pricebookr.com/docs/warranty-registration).

## Troubleshooting

| You see | Why | Fix |
| --- | --- | --- |
| Check model, serial and ratings against the original photo first. | The check box wasn't ticked. | Compare the values with the photo and tick the box. |
| No readable equipment label found. The photo remains uploaded. | Glare, angle or a worn plate. | Retake the photo square-on, or use **Scan again** after turning it. Or type the details in. |
| Ask your company admin to add credits in AI Assistant. | Not enough Prycey credits for this scan. | An admin adds credits, or the office types the details in. |
| Prycey scanning is unavailable. | Scanning is switched off or not available for your account right now. | Your photos are still uploaded; type the details in or try later. |
| Choose an accessible JPEG, PNG or WebP photo. Other uploads remain available in the gallery. | The file isn't a photo Prycey can read (a video, for example). | Select a photo of the plate. |
| This photo has no service property. | The photo isn't attached to a job or address. | Take the photo from the job, or attach it to the customer's property first. |
| The scan estimate changed. Review the new credit cap before scanning. | The cost changed between the estimate and the scan. | Review the new figure and scan again. |
| Your shop hasn't turned on automatic data plate scans. | The admin setting is off. | An admin turns on **Scan data plate photos automatically**, or scan by hand. |

Questions: [hello@pricebookr.com](mailto:hello@pricebookr.com).
