---
title: "How to Get Paid Faster as an HVAC Contractor"
description: "How to get paid faster as an HVAC contractor: deposits at approval, invoicing on site, clear terms, card vs ACH fees and an overdue-reminder schedule."
author: "Pricebookr Team"
date: "2026-11-09"
tags: "HVAC CRM, Invoicing, Getting paid, Cash flow"
source: "https://www.pricebookr.com/blog/how-to-get-paid-faster-hvac-contractor"
---

# How to Get Paid Faster as an HVAC Contractor

**The fastest way for an HVAC contractor to get paid is to collect part of the money when the customer approves the quote, send the invoice from the driveway before you leave, and give the customer a link they can pay from their phone.** Most late money in a small shop is not a customer refusing to pay. It is an invoice that went out three days late, on terms nobody agreed, with no easy way to pay and nobody following up.

## How do HVAC contractors get paid faster?

Getting paid faster comes down to removing the gaps between "yes" and "paid". In a one- or two-truck HVAC business those gaps are usually the same five:

1. **No deposit at approval.** The whole job is financed by you until it is finished.
2. **Invoicing from the office, later.** The invoice waits for paperwork night, and the customer's memory of the job fades.
3. **Vague terms.** "Pay when you can" becomes 45 days.
4. **Hard ways to pay.** A paper invoice and a check in the mail add a week before the money even reaches the bank.
5. **No follow-up system.** Overdue invoices get chased only when the owner remembers.

## Should you take a deposit when the customer approves the quote?

Yes, on equipment replacements and any job where you order parts. A deposit taken at the moment of approval covers your equipment cost before you buy it, confirms the customer is committed, and shrinks the balance you have to chase later. Small repair calls usually do not need one; the invoice at the end of the visit does the job.

The time to ask is when the customer approves the quote, not a day later by phone. If approval and the deposit payment happen on the same screen, there is no second conversation to have. A good quote makes this easier: when the homeowner is choosing between three clear options, the deposit is simply part of the option they picked. See [good, better, best pricing for contractors](https://www.pricebookr.com/blog/good-better-best-pricing-for-contractors) for how to build those options.

Check your state's rules before you set a percentage. Some states limit how much a contractor can take up front on a residential home-improvement contract, so confirm the limit with your state's contractor licensing board.

Here is a worked example for a $12,000 system replacement. It shows how the deposit percentage changes what you hold at approval, and what payment fees cost when the deposit and the balance are paid separately. Fees use a card rate of 2.9% + $0.30 per payment and a bank-transfer (ACH) rate of 1% capped at $50 per payment.

| Anticipo | Collected at approval | Balance at completion | Total card fees | Total ACH fees (1%, $50 cap) |
| --- | --- | --- | --- | --- |
| Ninguno | $0 | $12,000 | $348.30 | $50.00 |
| 25% | $3,000 | $9,000 | $348.60 | $80.00 |
| 30% | $3,600 | $8,400 | $348.60 | $86.00 |
| 50% | $6,000 | $6,000 | $348.60 | $100.00 |

Two things stand out. On cards, splitting the job into two payments costs only one extra $0.30. On capped bank transfers, each payment gets its own cap, so two payments cost more than one. On a big job that is still a small price for holding $3,000 to $6,000 of the customer's money instead of your own.

## Why should you invoice before you leave the driveway?

An invoice sent on site gets paid while the customer is standing next to a system that works again. The same invoice sent from the office on Friday night competes with everything else in their inbox. It also catches a missed part or extra refrigerant while you can still see the job.

To invoice from the driveway you need three things on your phone: the approved quote or the job's lines, a way to add what changed, and a way to text a payment link. If the work grew after approval, handle it as a change before you invoice, not as a surprise line; see [cómo ponerle precio a las órdenes de cambio](https://www.pricebookr.com/blog/how-to-price-change-orders).

Texting the link matters more than it sounds. A customer reads a text on the phone they will pay with; an emailed PDF has to be found, opened and acted on later. A link that opens a page with a pay button and the total due turns "I'll mail a check" into a payment made before you have backed out of the driveway.

## What payment terms should a small HVAC shop use?

For homeowners, use **due on receipt**. Residential service is a completed job for a household, not a credit account. For property managers, builders and commercial customers, Net 15 or Net 30 is normal, and the important part is that the terms are written on the quote before work starts, not announced on the invoice afterward.

- **Put the terms on the quote and the invoice.** The customer approved the terms when they approved the price.
- **State a late-fee policy if you use one**, and keep it within what your state allows. Ask your accountant or attorney for the wording.
- **Allow partial payments on large balances.** A customer who can pay half today is better than one who waits until they can pay all of it.
- **Offer financing on replacements** rather than stretching your own terms. See [comisiones de financiamiento para contratistas](https://www.pricebookr.com/blog/contractor-financing-fees) for what it costs you.

Maintenance customers are a separate case. If they are on a plan, the plan's billing, visits and discounts should already be settled when they sign up; see [cómo ponerle precio a un contrato de mantenimiento](https://www.pricebookr.com/blog/how-to-price-a-service-agreement).

## Card or bank transfer: which costs less to accept?

Bank transfer (ACH) almost always costs less, and the difference grows with the size of the job. Cards cost a percentage plus a fixed amount on every payment. ACH bank payments cost a smaller percentage and are often capped. Stripe's standard US pricing is [2.9% + 30¢ per successful domestic card payment and 0.8% capped at $5.00 for ACH Direct Debit](https://stripe.com/pricing). Software that runs payments through Stripe may charge you its own rate on top of that or instead of it, so check the rate you will actually pay.

The worked example below uses Stripe's published standard rates and Pricebookr's own published rates for comparison:

| Pago | Card, 2.9% + $0.30 | ACH, Stripe standard (0.8%, $5 cap) | ACH, Pricebookr Starter (1%, $1 min) | ACH, Pricebookr Pro (1%, $1 min, $50 cap) |
| --- | --- | --- | --- | --- |
| $180 service call | $5.52 | $1.44 | $1.80 | $1.80 |
| $450 repair | $13.35 | $3.60 | $4.50 | $4.50 |
| $1,200 repair | $35.10 | $5.00 | $12.00 | $12.00 |
| $4,500 furnace | $130.80 | $5.00 | $45.00 | $45.00 |
| $12,000 system | $348.30 | $5.00 | $120.00 | $50.00 |

The tradeoff is speed of confirmation. A card payment confirms in seconds. Stripe says an ACH Direct Debit payment [can take up to 4 business days](https://docs.stripe.com/payments/ach-direct-debit) to confirm success or failure. For a $180 service call, take the card and move on. For a $12,000 replacement, a customer who picks bank transfer instead of a card saves you more than $200 on that one job.

## How should you follow up on an overdue invoice?

Use a fixed schedule, send each reminder once, and stop automating after about a month. Repeated identical emails look broken and annoy customers; a month-old balance needs a phone call from a person, not another email.

| Days past due | Reminder | Who acts |
| --- | --- | --- |
| 0 (due date) | Friendly note with the balance and the payment link | Automatic email |
| 7 | Second reminder, same link | Automatic email |
| 14 | Firmer reminder that restates your terms | Automatic email |
| 30 | Final automatic reminder | Automatic email |
| 30+ | Phone call, then your written collections policy | Owner or office |

Two habits make the schedule work. Look at one list of what is owed and how late it is, every week. And record checks and cash as soon as they arrive, so nobody gets a reminder for a bill they already paid.

## How does an HVAC CRM shorten quote-to-cash?

An HVAC CRM shortens quote-to-cash by keeping the quote, the approval, the deposit, the job, the invoice and the payment in one record, so nothing has to be retyped and nothing waits for the office. The pieces that matter for getting paid are:

- **Online approval with a deposit** el the same page. In Pricebookr, a customer approves from a text or email link and can pay the deposit right after approving, which then comes off the final invoice automatically. See [online quote approval and deposits](https://www.pricebookr.com/hvac-crm/quote-approval-and-deposits).
- **Invoicing from the field app** at job closeout, with the payment link texted to the customer. See [the field app for iPhone and Android](https://www.pricebookr.com/hvac-crm/field-app).
- **Card, Apple Pay, Google Pay and bank transfer** into a Stripe account in your own name, with bank transfer offered first on payments of $1,000 or more. See [HVAC invoicing and payments](https://www.pricebookr.com/hvac-crm/invoicing-and-payments).
- **Overdue reminders** el the day an invoice is due and at 7, 14 and 30 days overdue, sent once each and off until you switch them on. See [automatizaciones](https://www.pricebookr.com/hvac-crm/automations).
- **Sincronización con QuickBooks Online** so invoices and payouts reach your books without retyping. See [Sincronización con QuickBooks Online](https://www.pricebookr.com/hvac-crm/quickbooks-online).

All of these are on both plans. Current prices are on the [pricing page](https://www.pricebookr.com/pricing), and you can [start a 14-day free trial](https://www.pricebookr.com/signup). If you already run Jobber, your Jobber connection keeps working alongside the CRM.

## Preguntas frecuentes

### How much deposit should an HVAC contractor ask for?

Ask for enough on an equipment replacement to cover the equipment before you order it; on a $12,000 system, a 25% to 50% deposit is $3,000 to $6,000. Small repairs usually need no deposit because you invoice at the end of the visit. Some states limit up-front payments on residential home-improvement contracts, so check your state contractor board's rule before setting a percentage, and put the deposit on the quote the customer approves.

### Is it cheaper to accept ACH or credit cards?

ACH bank transfer is cheaper for almost every job size. Stripe's standard US rates are 2.9% + 30¢ for domestic cards and 0.8% capped at $5 for ACH Direct Debit, so a $12,000 replacement costs $348.30 on a card and $5 by standard ACH. ACH takes up to four business days to confirm, so cards still suit small service calls.

### What payment terms should I put on a residential HVAC invoice?

Vence el on receipt is the standard for residential HVAC work, because the job is complete and the customer is not a credit account. Write the terms on the quote before the work starts, repeat them on the invoice, and send a payment link the customer can use on the spot. Save Net 15 or Net 30 terms for commercial customers and property managers.

### How often should I send reminders for an unpaid invoice?

Send one reminder on the due date and one each at 7, 14 and 30 days overdue, then stop automating and call the customer. Sending each reminder only once keeps them from looking like spam. After 30 days a personal call works better than another email, and your written collections policy decides the next step.
